Shopping Cart

Name Quantity  

Products Appraise My Trade

Analog Source

1.


SPL Phonos

Brand new, in stock, Phonos is a preamplifier for record players using either moving magnet (MM) or moving coil (MC) cartridges. The equalization curve is according to RIAA and suitable for all vinyl records since 1954. The RIAA filter is designed after Douglas Self. With up to 71.5 dB gain for MC cartridges and 50 dB gain for MM cartridges Phonos belongs to the most powerful phono preamplifiers.

$2999.00
Buy Now
with PayPal
Appraise My Trade
2.


Demo Clearaudio Performance DC package (enhanced)

In like new condition, with new, never installed Satisfy Kardan Carbom tonearm and will also throw in a brand new Clearaudio Concept V2 MC cartridge. New, this package is $5790.00 Comes with full warranty and installation within a 200km radius of Kingston.

$4500.00
Buy Now
with PayPal
Appraise My Trade
3.


Sutherland PhD

Battery powered phono stage of reference grade quality. Michael Fremmer had this to say about it " (The Sutherland PhD) is a monumental achievement that, for me, sets new standards for the cleanness and transparency possible in a phono preamp—and I've had a lot of experience with phono preamps". Cosmetically, 9/10, in perfect working condition and complete with original packaging and manual.

$1700.00
Buy Now
with PayPal
4.


Pre-owned Rega RP8

Would be considered mint were it not for the inevitable swirls on the clear cover. This is a reference level turntable that holds its own among the very best at the under 10K category. Only one previous owner, very well cared for and complete with all the original packaging and TTPSU. Does not come with a cartridge however we do have a new Apheta 2 cartridge that would look right at home on this beauty.

$2600.00
Buy Now
with PayPal
Appraise My Trade
5.


Clearaudio Concept Limited Edition

Panzerlike Dark Wood built from multiple layer high density wood plinth, 2 piece 30mm thick Delrin (POM) platter, Polished tempered steel bearing shaft within sintered bronze bushings, Mirror polished teflon thrust pad, Belt-driven by a decoupled DC motor, 33, 45 and 78 rpm at a turn of a dial, comes with a SATISFY KARDAN tonearm featuring a friction-free magnetic bearing. Includes factory installed Clearaudio Concept MC cartridge and it is ready to play with the bare minimum of effort or pre-requisite expertise. Demo model available at 15% off

$4295.00
Buy Now
with PayPal
Appraise My Trade
6.


In-Stock - Clearaudio Innovation Compact Black on Black

The Innovation Compact Wood is based on the technology of the Clearaudio Innovation Wood turntable, but uses a single plinth as opposed to the stainless steel sub-platter found on the Innovation Wood. Its resonance-optimized chassis shape is based on the proven success of Clearaudio’s three-point design — a combination of Panzerholz, aluminum layers, and aluminum pods. The Innovation Compact Wood uses Clearaudio’s patented CMB (Ceramic Magnetic Bearing) technology, where the platter magnetically levitates on an inverted bearing attached to a low-friction ceramic shaft. The high-torque DC motor is equipped with electronic OSC (Optical Speed Control). The high-density, dynamically balanced 2.75″ polyoxymethylene (POM) platter provides excellent dimensional stability. The Innovation Compact Wood is dual tonearm capable.

$8995.00
Buy Now
with PayPal
Appraise My Trade
7.


In-Stock - Clearaudio Ovation Black on Black

The Ovation incorporates high-performance technology from the Clearaudio Innovation Wood series of turntables, but in a more affordable “lifestyle” design and echoing the award-winning ergonomics of the Clearaudio Concept turntable. The powerful and smooth DC motor is equipped with Clearaudio’s OSC (Optical Speed Control) technology, which continuously monitors a micro-infrared strobe to ensure exact speed stability. The motor drives a precision-machined aluminum sub-platter and 40mm POM (polyoxymethylene) platter, both of which are supported by Clearaudio’s patented CMB (Ceramic Magnetic Bearing).

$8195.00
Buy Now
with PayPal
Appraise My Trade
8.


In-Stock - Clearaudio Concept package

The Clearaudio Concept packages bring the magic of optimum value in vinyl sound reproduction. It comes in 2 versions, one fitted with the Concept MM cartridge ($2195) or the Concept MC cartridge ($2895). Both version come with the Verify tonearm and they are both fully set-up for plug and play out of the box.

$2195.00
Buy Now
with PayPal
Appraise My Trade
9.


Clearaudio Performance DC package

The Performance DC’s main composite chassis consists of a specific density wood core sandwiched between two massive anodized aluminum plates. A band of polished silver aluminum is wrapped around the plinth’s core, giving the Performance DC an elegant and modern look. The powerful and smooth-running DC motor is mounted to the composite main chassis and is effectively decoupled for enhanced dynamic range. The motor and belt are hidden from view, protected from dust and UV. They drive a precision machined aluminum sub-platter coupled to a 40mm thick polyoxymethylene (POM) platter, supported by Clearaudio’s patented CMB (Ceramic Magnetic Bearing). The DC package comes with the Clarify tonearm and Virtuoso V2 MM cartridge and available in either Black with Silver Chassis or Black on Black either way, the Performance DC package is a terrific value!

$4995.00
Buy Now
with PayPal
Appraise My Trade
10.


Clearaudio Concept LE Package

The Concept Wood turntable furthers the sonic excellence of the award-winning Concept turntable. The Concept Wood uses a baltic birch, constrained layer plinth that is both visually attractive and sonically rich and smooth. The aluminum machined sub-platter and rear-mounted fine speed adjustments are an upgrade from the original Concept design. The Concept Wood is equipped with the Satisfy Black tonearm, which features a 3-point mechanical bearing, magnetic anti-skate, and hard-wired tonearm cable. You can upgrade to the Satisfy Carbon Fiber tonearm for enhanced musicality and imaging. A high-quality Clearaudio moving magnet (Concept MM) or moving coil (Concept MC) cartridge can be pre-mounted to complete this setup. The Concept is belt-driven by a low-noise, decoupled DC motor built into the baltic birch plinth. The platter is made of 30mm-thick polymer (POM), an engineering thermoplastic with a weighted rim for increased fly-wheel effect, providing greater speed stability. The Concept Wood plays at three speeds – 33rpm, 45rpm, and 78rpm – selectable by an Electronic Speed Control knob. Available with either the Satisfy Kardan tonearm and Performer V2 MM cartridge ($3295) or the Satisfy Carbon tonearm and Concept MC cartridge for $4295

$3295.00
Buy Now
with PayPal
Appraise My Trade
11.


In-Stock - Clearaudio Magnify tonearm

The innovative Magnify tonearm uses a unique, low-friction hybrid ball bearing/magnetic pivot assembly, providing a new level of performance for tonearms in its price range. The Magnify features a carbon fiber arm tube which reduces resonance for enhanced clarity. The Magnify’s precision-machined aluminum headshell features adjustable azimuth. Additionally, fine adjustments for vertical tracking force (VTF), anti-skate, and bearing damping assures the most accurate phono cartridge setup. The Magnify is internally wired with Clearaudio’s best Six Stream cable, as found on their Statement TT-1 tonearm. This assures superior signal integrity, ideal for all high-quality phono cartridges, especially low-output moving coils. The Magnify uses the Clearaudio/Linn standard mount, making it compatible with all Clearaudio turntables and an ideal replacement tonearm for other brand turntables.

$4295.00
Buy Now
with PayPal
Appraise My Trade
12.


In-Stock - Clearaudio Satisfy carbon tonearm

The Satisfy CF (Carbon Fiber) tonearm features high-quality, handmade Swiss vertical and lateral bearings composed of polished sapphire. A carbon fiber arm tube is exceptionally rigid and reduces resonance for enhanced clarity. A two-piece aluminum headshell with adjustable azimuth allows the accurate alignment of any phono cartridge type. Anti-skating control is applied by an innovative magnetic system that acts on the side of the bearing housing. Clearaudio’s hardwired Direct Wire tonearm cable assures signal integrity, ideal for all high-quality cartridges, including low-output moving coils. The Satisfy CF uses the Clearaudio/Linn standard mount, making it compatible with all Clearaudio turntables and an ideal replacement tonearm for other brand turntables.

$1895.00
Buy Now
with PayPal
13.


In-Stock - Clearaudio Talismann V2 Gold MC cartridge

The v2 moving coil cartridge bodies of the Clearaudio models (Talismann v2 Gold, Concerto v2, Stradivari v2, da Vinci v2, Titanium v2) are made out of the following: titanium, ceramic coated aluminum, Ebony and Satinee wood. The generator construction of the new v2 moving coil cartridge generation is absolutely symmetrical: mechanically, magnetically and electrically, our unique design. All Clearaudio moving coils use their proven 24-karat pure gold coils. A clear breakthrough in analog music reproduction has been achieved with this new moving coil v2 cartridge generation. The new generation is able to reproduce a dynamic range of 100 dB with a frequency response of 10 Hz up to 100KHz.

$2195.00
Buy Now
with PayPal
Appraise My Trade
14.


In Stock - Clearaudio accessories

We have a variety of accessories as well as access to the entire Clearaudio catalog, including all Premium components, from record clamps, scales to the Double Matrix Professional Sonic record cleaners, please call for details or to order.

$195.00
Buy Now
with PayPal
15.


Integrity Hi-Fi Tru-Lift (free shipping)

Very simple and well made (in London Ontario) automatic tonearm lft. This is a must have accessory for analog enthusiast and an relatively inexpensive insurance against the potential ravage of forgetting to raise the tonearm at the end of the record. Please visit integrityhifi's website for a video demonstartion.

$179.00
Buy Now
with PayPal
16.


Rega RP10 (in stock)

Rega’s design philosophy extends further than ever before with advanced components built around our radical new plinth design. Featuring the brand new RB2000 tonearm, a ceramic flywheel effect platter and the custom RP10 power supply (allowing total control and accuracy over both motor vibration and speed performance) guarantee the highest level of performance from a Rega turntable to date. The RP10 represents probably the biggest step forward in the evolution of Roy Gandy’s turntable design philosophies. Low mass, high rigidity plinths combined with electronically controlled low vibration motors, high flywheel effect platters and lower mass higher stability tonearms.Housed in Rega's custom design case is a brand new advanced anti vibration and speed control circuit dedicated to running the 24v low noise motor. The speed and control of the motor is achieved by using a new DSP (digital signal processing) generator built upon a high stability crystal. The device will divide the accurate square wave from the crystal to the exact frequency required to turn the platter at the selected speed. The RB2000 tonearm is packed with new features pushing the boundaries of tonearm design. As with all Rega tonearms, each one is meticulously hand built by a team of highly skilled technicians. The RB2000 uses improved bearings with each one being hand selected to be an interference fit with the paired spindle matching both the inside and outside diameters. This is a Rega developed method of increasing the amount of detail retrieved from the record surface, designed specifically to maximise performance of the tonearm and cartridge. The entire tonearm structure is designed to have the minimum of mechanical joints whilst using the stiffest materials in all critical areas. The tolerance of the RB2000 tonearm is so tight that no adhesive is used at any point throughout the construction. A brand new low mass, precision engineered, vertical bearing assembly has been manufactured to further compliment the inherent design philosophy of the RP10 turntable.

$6699.00
Buy Now
with PayPal
Appraise My Trade
17.


NEW Rega Apheta 2 (in Stock)

The Apheta 2 is the second generation of Rega's unique moving coil cartridges. Taking the technology developed from the first Apheta to the next level, our engineers have fine tuned every aspect of the original design. Apheta 2 features a super high-powered, neodymium magnet and a coil meticulously hand wound on an iron cross that is fifty percent smaller than the original. This weight reduction allows us greater freedom to track the vinyl groove ensuring even more detail is extracted from the vinyl. To further enhance the design, the Apheta 2 is housed within a completely redesigned, single piece, aluminium anodised body and protected by a CAD designed, clear rigid cover to protect the internal fine wires, making handling whilst fitting, safe and risk free. The entire production department was overhauled at great expense to introduce the Apheta 2 MC. Huge investments into High Definition magnification cameras and displays have allowed us to work at much higher detail and far tighter tolerances than ever possible on the original model. The Apheta 2 is the perfect partner for the RP8 and RP10 turntables which can be supplied factory fitted at a discounted package rate if requested. Please ask us for details.

$2399.00
Buy Now
with PayPal
Appraise My Trade
18.


Music Hall WCS-2 Record Cleaner

The WCS-2 is one incredibly stout and powerful vacuum record cleaner. This stunning machine does a superb job cleaning your records. The interlocking alloy chassis is gorgeous to look at, easy to clean, and doesn't warp or degrade like wood models. The high powered vacuum system really sucks the muck out of the grooves and fully dries your record in one rotation. This saves time and reduces heat and static exposure to your records during the process. Accepting pre-orders, get them while you can...

$999.00
Buy Now
with PayPal
19.


Naim Stageline

Nice entry level phono preamp that won't break the bank yet offer enough musicality to enjoy your Album collection all over again. Must be paired with either a Naim Integrated amp or a Naim Flatcap power supply.

$750.00
Buy Now
with PayPal
20.


Rega RP6

The RP6 has been designed and engineered to achieve outstanding performance way beyond the expectations of a product at this price point. Excellent build quality, reliability and ease of use combine to make a product which, if used correctly, will offer you a lifetime of musical enjoyment. The RP6 is fitted with a hand assembled RB 303 tonearm, precision main bearing and a low vibration, low noise 24 volt motor assembly which is individually hand turned to its circuit to further reduce vibration. Available in Gloss Black, Gloss Red, Gloss White and Gloss green. Models with the factory mounted Exact cartridge also available for $2499.00

$1999.00
Buy Now
with PayPal
21.


Rega RP8

Featuring ground breaking technologies in terms of material and construction making this the best table ever made by Rega and a serious contender in the world high end analog source. The factory mounted Apheta cartridge negates the trials and troubles associated with the science of properly mounting such a precise musical instrument. Available with the Apheta 2 cartridge for $4999.00 or with the Exact 2 cartridge for $4199

$3699.00
Buy Now
with PayPal
Appraise My Trade